Highland WeatherTree, Инструкция по установке и активации

Страница: 10 / 16

ON OFF CHG LNK STAT PWR
ON OFF CHG LNK STAT PWR
6
|
ASSEMBLY
Press and hold the OFF button for 2 seconds to ensure the unit is off.
Press and hold the ON button until the status (STAT) light is blinkng.
After you press and hold the ON button to put into diagnostic mode, the STATUS LED will
flash for approximately 2 minutes. During that time, the box should pair to the sensor
array. If the status light turns solid after the 2 minutes, the station has successfully paired
to the sensor array and your weather data should get sent to the HUB for viewing.
If the status light never stops blinking after the 2 minutes, reset the sensor array with the
screwdriver, turn off the station box, then hold down the ON button for 5 seconds to start
the pairing process again.