Highland HIO75.2MP, Инструкция по использованию и установке

Страница: 24 / 35

Use & Installation Manual
2 4
Setting the Self-Clean Mode
To Set the Self-Clean Mode
1. Press UPPER/LOWER key to select the
cavity to be cleaned, if the oven is a double.
2. Rotate both knobs into the clean position.
3. CLEAN & TIME appear.
4. The number of cleaning hours is displayed
automatically, standard cleaning time is 3
hours.
5. At the end of the programmed cleaning time,
the oven will automatically turn off.
6. To stop the cleaning mode at any moment,
move one of the two knobs from the cleaning
position.
Do not attempt to open the door while the door is
locked. The lock symbol will flash until the motor
stops. When the lock symbol is displayed, the
door cannot be opened.
Check that the door has been locked and will not
open before starting the Self-Clean mode.
If door does not lock, rotate the cooking mode
knob into the OFF position and do not start self-
clean; phone for service.
If the door is in the open position when this mode
is selected, the lock symbol will flash until the
door is closed. The latch doesn’t move.
To Change the Cleaning Time
1. To change the setting from 3 hours, select
either 2 hours for light soil or 4 hours for
heavy soil immediately before starting.
2. To change the hours, touch the COOK
key.
3. The number of hours for cleaning will flash.
4. Use INC or DEC buttons to change the
number of hours.
5. To change the minutes, touch the COOK
key.
6. The number of minutes for cleaning will flash.
7. Use INC or DEC buttons to change the
number of minutes. Hold the key to change
by 10 minutes.
Press COOK or wait a few seconds to
confirm the new value.
To Delay the Start of Cleaning
1. Follow steps 1 through 7 above.
2. Touch the STOP key and the hour to
stop will begin flashing.
3. Use INC or DEC buttons to change the stop
hour.
4. To change the minutes, touch the STOP
key.
5. The minutes to stop cleaning will flash.
6. Use INC or DEC buttons to change the
minutes. Hold the key to change by 10
minutes.
7. Press STOP or wait a few seconds to
confirm the new value.
8. Oven door will lock and display shows
DELAY.
9. When the delay time ends, cleaning will start.
10. At the end of the programmed cleaning time,
the oven will automatically turn off.
11. END will appear on the display, CLEAN &
TIME will flash until any time key is touched
or the knob is moved to the OFF position.
TO CHECK CLEAN TIME OR STOP TIME
during a delayed clean, simply press COOK
or STOP buttons
.