HighEasy HY-8004HC, Руководство пользователя

Страница: 48 / 94

Page 48 of total 94 pages
Mosaic: it is used to hide privacy area, select to start using mosaic, press ok key can enable or cancel
selection. When setting mosaic, can select Mosaic Set , press ok key , and then enter mosaic setting
figure, see the following figure:
Setting area is divided into 192 （ 16*12 ） zones, white border block represent current cursor position, blue
area is a mosaic defended area, the normal color one is non- defended area. Press auxiliary key to switch
to defended state and non-defended state. During the defended state, press direction key to move white
border grid to set mosaic area, when it is in non-defended state, press direction key to move white
border grid can cancel defended state area, it supports only two pieces of mosaic area, press exit key to
save setting when finish setting and exit. Before exit from Encoder dialogue, must press save in order to
save the mosaic area setting.
OSD: Set clock and characters and their positions on display window. select X or Y axis position, press
directly number key to set display position ； select character, press Chinese and English switch key , and
then press number key (notice :here the number keys will extend as alphabet characters)input Chinese
characters or phonetic
（
when input Chinese characters, press number key to select phonetic of Chinese
characters, press ok key can select Chinese characters, and press up and down direction key to carry out
Chinese characters flip over, find out the needed character, and then press the corresponding number
key, can input this character ） . Channel name can only be inputted no more than 30 characters. OSD
clock coordinate X must be less than 380, coordinate Y must be less than 500. Character coordinate X
must be less than 380;,coordinate Y must be less than 460.
Prerecord: set a short anticipatory recording time before the formal recording of motion detection
and external alarm. Selected Prerecord, press ok key to enable the edit, and then can press directly
number key to input prerecording time. Every channel may have different prerecord time.. Prerecording
time should be set at 4-10S.
Duration: set a delayed recording time after the recording of motion detection and external alarm.