• Always store the unit indoors.
• Keep hair; loose clothing, and
all parts of the body away from
moving parts.
• Do not use the appliance
when charging cover is open.
• Do not submerge the handle
in water or other liquid.
• Use only as described in this
manual. Use only
recommended parts.
• Only use attachments
recommended or sold by the
manufacturer.
• To disconnect, turn all
controls to the OFF ("O")
position, then remove plug
from outlet .
• Do not operate any appliance
with a damaged cord or plug,
or after the appliance
malfunctions or is dropped or
damaged in any manner.
Return appliance to the
nearest author ized service
facility for examination, repair,
or electrical or mechanical
adjustment.
PLEASE RETAIN THESE INSTRUCTIONS
If using Extension Pole:
l . Be sure ON/OFF button on
"Handle" is in OFF position.
2. Line up connection tab of
"Extension Pole" and "Release
Button" of "Handle". Press together
until you hear a "click."
3. Line up connection tab of "Head"
and "Release Button" on Extension
Pole. Press together until you hear a
"click."
4. To attach brush attachment of your
choice, simply line up tabs of "Brush
Attachment" and "Brush Connector"
on "Head" and press together until
you hear a "click."
Without Extension Pole:
1. Be sure ON/OFF button on
“Handle” is in OFF position.
2. Line up connection tab of “Head”
and “Release Button” on Handle.
Press together until you hear a
“click.”
3. To attach brush attachment of your
choice, simply line up tabs of Brush
Attachment and “Brush Connector”
on “Head” and press together until
you hear a “click.”
1. Be sure ON / OFF button on
"Handle" is in OFF position .
2. Open "Charging Port Cover" located
on bottom of "Handle" of unit.
3. Insert cable end of 'Wall Charger "
into "Charging Port."
4. Plug 'Wall Charge r" into wall outlet .
Red light next to "Charging Port" will
blink RED to show unit is charging .
5. Allow Turbo Scrub™ to charge for 3
hours and 30 minutes. Red light will
remain lit when battery is completely
charged.
6. When done, remove 'Wall Adapter "
from unit and wall, and close "Charging
Port Cover".
Do NOT exceed 12 hours of consecutive charging. Doing so may
lead to shortened overall battery life. It is not necessary to wait until
battery power is fully depleted before recharging.
CHARGING INSTRUCTIONS:
ASSEMBLY INSTRUCTIONS:
• Always use rubber gloves and
proper eye wear to avoid contact
from splashing of soaps or
detergents on skin and/ or eyes while
head is spinning and when brushes
are removed or attached.
• When done using Turbo Scrub™,
turn unit off while brush is still in
contact with surface to avoid getting
splashed with soaps or detergents .
• Always test on a small, inconspicu-
ous area before using on a larger
area. Always follow surface manufac-
turer's guidelines for cleaning and
maintenance.
• Do not use with abrasive cleaners
on any surface.
• Avoid exposing the unit to exces-
sive water. If Turbo Scrub™
accidentally becomes submerged in
water or water gets into "Charging
Port", shake out liquid and allow
Turbo Scrub TM to dry overnight .
WARNING:
OPERATION INSTRUCTIONS:
l. Choose proper Brush Attachment
and attach to Turbo Scrub™ as
directed in Assembly Instructions."
• All-Purpose Brush: Best for large
jobs, cleaning tile, and grout.
• Corner Brush: Best for corners,
door tracks, and tight spaces .
• Heavy Duty Brush: Best for tough
jobs, where you need to focus power
on a certain area .
2. Wet the intended area and apply
desired cleaning product.
3. Place tip of brush on surface to be
cleaned.
4. Being sure you have a firm hold of
the handle, press ON/OFF button
once for HIGH speed or twice for
LOW speed. If using on HIGH
speed, you will need to press
ON/OFF button twice to turn off.
