High Power RockSolid Pro 1600W, Руководство пользователя, Страница: 6 / 32

3
Instruction Manual
Important Safeguards
For your protection, please read these safety instructions completely before
installation.
Caution
● Please check the Voltage Select Switch to be switched at adequate position. (AC
110V area please switch to 115, AC 220V area switch to 230)
● Please check the Voltage Select Switch to be switched at adequate position. (AC
110V area please switch to 115, AC 220V area switch to 230)
● If there is no Voltage Select switch on the unit, please exam the specification on the
PSU sticker and make sure the voltage function corresponds to the voltage source
of your territory.
● Please do not unplug the AC power line when the power supply is in use, even in a
flash quick manner will cause damage to the components.
● Please do not store the power supply in high humid temperature place, or to be
used in such condition.
● Warning: Please do not open the PSU cover, High voltages exist in the power
supply. Unless authorized personnel.
● High Power warrants its product for use within the product specification. It is
very important for you to check and confirm the product specification meets your
requirements before use.
Installation
● To prevent electrical shocks, please disconnect the power cord from your existing
PSU.
● Make sure the I/O switch of the new PSU is at off “O” position. After install the new
PSU into the chassis, connect the Main power connector to the mother board.
● Note: Please refer to your motherboard user guide before connecting the Main
power connector and CPU connector.
● Connect the CPU connector to the CPU socket on motherboard.
● Connect the PCI-E connector to the graphic card if needed.
● Connect the Peripheral connector to peripheral devices such as DVD, HDD…etc.
● Connect the Floppy disk connector to the floppy drive if any.
● Connect the S-ATA connector to the S-ATA HDD if any.