High-Flying HF-LPB100 Скачать руководство пользователя страница 80 | Manualshive

Страница: 80 / 81

background image

HF-LPB100 Low Power Wi-Fi Module User Manual

Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com)

- 80 -

FCC INFORMATION (additional)

OEM INTEGRATION INSTRUCTIONS:

This module has been approved for use in two configurations:

A. Mobile Configuration (The module must be installed in the host equipment such that a

minimum distance of 20 cm is maintained between the antenna and user)

B. Portable Configuration (The module must be installed in the host equipment such that a

minimum of 12.7 cm is maintained between the antenna and user)

This device is intended only for OEM integrators under the following conditions:

1. The module must be installed in the host equipment such that specified minimum distance
is maintained between the antenna and user (20cm for “Mobile” application, 12.7cm for
“Portable” application)
2. The transmitter module may not be co-located with any other transmitter or antenna.

3. The module shall be only used with the external antenna(s) that has been originally tested

and certified with this module

As long as 3 conditions above are met, further transmitter test will not be required. However,

the OEM integrator is still responsible for testing their end-product for any additional

compliance requirements required with this module installed.

Validity of using the module certification:

In the event that these conditions cannot be met (for example certain laptop

configurations or co-location with another transmitter), then the FCC authorization for this

module in combination with the host equipment is no longer considered valid and the

FCC ID of the module cannot be used on the final product. In these circumstances, the

OEM integrator will be responsible for re-evaluating the end product (including the

transmitter) and obtaining a separate FCC authorization.

End product labeling:

This transmitter module is authorized only for use in device where the antenna may

beinstalled such that 12.7 cm may be maintained between the antenna and users. The final
end product must be labeled in a visible area with the following: “Contains FCC ID: AZYHF-
LPB100”.

Information that must be placed in the end user manual:

For a “Portable” application, maintain a minimum separation distance of 12.7cm or more from
all persons during operation. For “Mobile” application, maintain a minimum separation
distance of 20cm or more from all persons during operation. Installations requiring less

distance, or installations using antennas with gain greater than that with which this was

Certified will require additional testing/approvals.

«
...
78
79
80
81
»

Содержание HF-LPB100


















































































Отзывы:

Нет отзывов

Похожие инструкции для HF-LPB100

Бренд: D-Link Страницы: 4

Бренд: D-Link Страницы: 2

DWL-2700AP - AirPremier Outdoor Wireless Access...

Бренд: D-Link Страницы: 70

DWL-2200AP - AirPremier - Wireless Access...

Бренд: D-Link Страницы: 58

Бренд: Mixcder Страницы: 75

AirborneM2M APX-Q5 Series

Бренд: B&B Electronics Страницы: 105

WL-ICNAP48F-060

Бренд: Mach Power Страницы: 22

Бренд: Pakedge Страницы: 10

Бренд: Celleden Страницы: 5

Бренд: Z-Com Страницы: 38

Бренд: Draytek Страницы: 2

Бренд: Huawei Страницы: 2

Бренд: Huawei Страницы: 52

Бренд: Huawei Страницы: 57

Бренд: Huawei Страницы: 20

Бренд: Huawei Страницы: 24

Бренд: Huawei Страницы: 22

OptiXstar P622E

Бренд: Huawei Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды