High End Systems Technobeam Скачать руководство пользователя страница 25

Страница: 25 / 173

Intro-2 Introduction

Technobeam

User Manual

•

Mirror head providing 180° pan, 95° tilt.

•

12 saturated dichroic colors—including a 3000K color correction
filter—plus open position.

•

Rotating 8-position LithoPatterns

wheel features 7 replaceable

positions plus open.

•

Optional static litho in each of the 7 replaceable rotating litho
positions for layered moire and multi-focus effects.

•

Effects wheel features five replaceable, rotating effects—including
frost, lenticular, and hammered.

•

Optional open slot at one or more effects positions.

•

Improved flat field beam performance.

Note

All beam angles are accurate to ±1°.

Construction

•

Lens tube, wheel gears, front and rear bezels manufactured from
lightweight, rugged, engineering thermopolymer.

•

Tough powder-coated aluminum side panels.

•

Molded handles for easy transportation, lifting and mounting.

Lamp

High End Systems recommends you use an M series, GY9.5 base, 250-
watt metal halide arc lamp (such as the MSD 250-2) which provides
6500K stable operation and extended lamp life.

The lamp can be remotely switched off, conserving approximately 70%
of the power to the unit compared to the lamp being on.

Other features

•

Remote focus

•

Full dimming and fade-to-black

•

Variable-speed strobe

•

Yoke assembly features sliding track for mounting flexibility

•

Available as standard in black or white

•

Power factor correction

•

Self-adjusting fan speed to compensate for ambient temperature
conditions

Содержание Technobeam














































































































































































Результаты поиска

Содержание Technobeam

Отзывы:

Похожие инструкции для Technobeam

Бренды по названию

Популярные бренды

High End Systems Technobeam, Руководство пользователя

Результаты поиска

Содержание Technobeam

Отзывы:

Похожие инструкции для Technobeam

Бренды по названию

Популярные бренды