High End Systems studio color, Руководство пользователя

Страница: 28 / 114

1-2 Studio Color User’s Manual
Road Cases
If Studio Color fixtures will be transported after they are unpacked from their
original shipping box, a professional road case is strongly recommended. Road
cases must be purchased from High End Systems or constructed according to
the information in this section.
Minimum Material Requirements
Use the following materials to construct the road case:
• 3/4-inch pressed plywood
• 4 pound poly-ethylene foam
• steel or aluminum rivets
Construction Requirements
The road case must be constructed in a manner that supports the base and the
handles with the head pointed down and the yoke rotated 90°. Refer to Figure 1.1
and Figure 1.2.
Caution: For 575-S fixtures, allow a small gap in the foam around the heat sink to
ensure that the foam is not damaged by the heat from the fixture.
Figure 1.1. Road Case Construction Overhead View
fixture base
foam
foam over wood supporting handles
case exterior
foam over wood supporting base