High End Systems SolaHyBeam 2000, Руководство пользователя

Страница: 31 / 42

SolaHyBeam 2000 User Manual
31
v1.3
Hibernation ——Standby mode
The lamp and step motors will be power off if the fixture stay without DMX signal for 15 mins (Factory
default).And the fixture will be reset before working once it receive DMX signal again.
1. Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until “SET” is
displayed. Press ENTER, the display will show “SET”. Tap the <Up/Down>button until the
display will show “Status”. Press ENTER, the display will show “Status”.
2. Press <Up/Down>, the display will show “Hibernation”.
3. Press< ENTER>, the display will show “Hibernation”.
4. The display show “15M”, Press <Up/Down>, the display will show “01M”
，
”02M” …. “99M” or
“OFF”.
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Defogger
1. Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until “SET” is
displayed. Press ENTER, the display will show “SET”. Tap the <Up/Down>button until the
display will show “Status”. Press ENTER, the display will show “Status”.
2. Press <Up/Down>, the display will show “Defog OnO.”.
3. The display show “Defog OnO.”, Press <Up/Down>, the display will show “Defog Off”, “Defog
OnPwr”.
4. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Service PIN
Password
The Password for this function is “50”.
Disp. Setting
Shut off time
With this function you can shut off the color LCD display after 2 to 59 minutes. Turn the encoder in
order to select the desired shut off time. The default is 5 minute.
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until “Set” is
displayed. Press ENTER, the display will show “Set”. Tap the <Up/Down>button until the display
will show “Disp.Setting”. Press ENTER, the display will show “Disp.Setting”.
2
．
Press <Up/Down>, the display will show “Shutoff Time”.
3
．
Press< ENTER>, the display will show “Shutoff Time”.
Flip Display
With this function you can the entire display to be flipped by 180˚ to allow for better view when the
fixture is hung from truss or a ceiling. This function is disabled as default.
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until “Set” is
displayed. Press ENTER, the display will show “Set”. Tap the <Up/Down>button until the display
will show “Disp.Setting”. Press ENTER, the display will show “Disp.Setting”.
2
．
Press <Up/Down>, the display will show “Flip Display”.
3
．
Press< ENTER>, the display will show “Flip Display”.
4
．
The display show “OFF”, Press <Up/Down>, the display will show “ON”.
5
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.