Hifonics ZEUS EXTTREME ZXT8000/1, Руководство пользователя

Страница: 18 / 28

18
ENGLISH
ELECTRICAL INTERCONNECTION
+12V
Connect the 12 volt terminals of the amplifier to the positive poles of the power capacitors by using
suitable cables. Then connect the positive poles of the power capacitors to the 12 volt positive pole
of the additional battery.
ATTENTION: Use for both connections sufficiently dimensioned cables of at least Ø 50 mm
2
with a to-
tal length of max. 2 meters. If you use longer cables, the cross-section must be correspondingly larger.
Use very short cable lengths from the amplifier to the power capacitors, which should be mounted
close as possible to the amplifier.
1
BEFORE CONNECTING
For the professional installation of a sound system, car audio retail stores offers appropriate wiring kits. Ensure
a sufficient profile section and a suitable fuse rating and the conductivity of the cables when you purchase
your wiring kit. Clean and remove rust-streaked and oxidized areas on the contact points of the battery and the
ground connection. Make sure that all screws are fixed tight after the installation, because loose connections
cause malfunctions, insufficient power supply or interferences.
Not included in the scope of delivery
ZXT 8000/1
SPEAKER OUTPUT
DANGER
HIGH VOLTAGE
LINE INPUT
MIN MAX 10 Hz 100 Hz 50 Hz 5 kHz 0 dB 12 dB 30 Hz 70 Hz
INPUT
SENS.
SUB
SONIC
LOW
PASS
BASS
BOOST
BOOST
FREQ.
POWER CLIP
PROTECT
POWER INPUT POWER INPUT
DO NOT COVER
AIR VENT
DO NOT COVER
AIR VENT
EXTERNAL FUSE REQUIRED
GND GND +12V +12V REM
HIGH VOLTAGE
1.0 - 9.0 V
LOW VOLTAGE
0.4 - 3.6 V
< 30 cm >
Turn-on cable to the head
unit (car radio)
ADDITIONAL
BATTERY
< 15 cm >
< 15 cm >
1 2 3
6
6
5
4
4
< 30 cm >
Min. Ø 50 mm
2
with a
max. total length of 2.0 m
Min. Ø 50 mm
2
with a
max. total length of 2.0 m
Min. Ø 50 mm 2 with a
max. total length of 2.0 m
Min. Ø 50 mm
2
with a
max. total length of 2.0 m