background image

Place terminal in a secure 

position so that it won’t 

accidentally contact the 

negative battery post

For power cable runs over 20 feet, 

8ga is recommended.

Power cable size

and fusing

It is critical to use the proper power 

and ground cable. Select the size 

listed here for your amplifier model. 

Always use high quality copper 

cable. Visit our website for multi amp 

system cable recommendations.

Be sure to use the proper fuse size 

for each model. Some models require 

an external fuse.

Properly route power, 

speaker and RCA cables 

through the vehicle.

Choose a mounting location 

that will provide adequate air 

ventilation. Mount the amplifier to 

a secure surface. Do not mount 

the amplifier upside down.

Attach the chassis ground, +12V and remote wire. 

It is important to make sure these connections are 

very secure.

Bare metal

Connect the RCA cables to 

the INPUT connectors. The 

OUTPUT can be used to 

provide input for a second 

amplifier.

Connect the power cable to the 

positive battery terminal. The 

power cable must be fused 

within 18 inches of the battery 

terminal.

Re-connect the negative 

battery terminal making sure it 

is securely tightened.

Connect the speaker cables to 

the speaker output connectors. 

Follow the diagram below 

that best fits your speaker 

configuration.

The chassis ground connection 

is critical to the performance 

of the amplifier. Choose a 

location that is close to the 

amplifier. Completely scrape 

away the paint and use a nut 

and bolt if possible.

DO NOT USE AN EXISTING 

FACTORY BOLT!

 

 

 

 

 

 

 

 

 

Disconnect 

Negative Battery 

Terminal

Run Cables

Mount Amplifier

Power 

Connection

Signal Input 

Connection

Positive Battery 

Connection

Re-connect 

Negative Battery 

Terminal

Speaker

Connections

Chassis Ground

Be prepared to disarm your vehicle’s alarm and 

to enter your radio / source unit code.

Installation

Before you start

CAUTION

Many new and factory radios require a reset code when 

disconnected from battery power. This is an anti-theft 

feature. Before unplugging power, you must determine if 

your radio/source unit requires a reset code. Check the 

operation manual for your vehicle or contact the dealer.

1

2

3

5

6

9

10

8

4

 

Turn the GAIN control completely 

counter-clockwise to minimum.

Gain Control

7

10ga

Model          Fuse Size       Cable Size

TPS-A500.2
TPS-A350.4
TPS-A500.1
TPS-A600.5

1-30A atc

1-30A atc

1-30A atc

1-40A atc

Speaker Positive - Gray

Left Positive - White

Left Negative - White / Black

Left Front Positive - White

Left Front Negative - White / Black

Right Positive - Gray

Right Negative - Gray / Black

Left Positive - White
Left Negative - White / Black

Right Positive - Gray
Right Negative - Gray / Black

Right Front Positive - Gray

Right Front Negative - Gray / Black

Left Rear Positive - Green

Left Rear Negative - Green / Black

Right Rear Positive - Purple

Right Rear Negative - Purple / Black

Ground - Black

Remote - Blue

+12V - Red

Ground - Black
Remote - Blue
+12V - Red

Left Front Positive - White
Left Front Negative - White / Black

Right Front Positive - Gray
Right Front Negative - Gray / Black

Left Rear Positive - Green
Left Rear Negative - Green / Black

Right Rear Positive - Purple
Right Rear Negative - Purple / Black

Speaker Negative - Gray / Black

Speaker Positive - Gray
Speaker Negative - Gray / Black

Speaker Positive - Gray

Left Positive - White

Left Negative - White / Black

Left Front Positive - White

Left Front Negative - White / Black

Right Positive - Gray

Right Negative - Gray / Black

Left Positive - White
Left Negative - White / Black

Right Positive - Gray
Right Negative - Gray / Black

Right Front Positive - Gray

Right Front Negative - Gray / Black

Left Rear Positive - Green

Left Rear Negative - Green / Black

Right Rear Positive - Purple

Right Rear Negative - Purple / Black

Ground - Black

Remote - Blue

+12V - Red

Ground - Black
Remote - Blue
+12V - Red

Left Front Positive - White
Left Front Negative - White / Black

Right Front Positive - Gray
Right Front Negative - Gray / Black

Left Rear Positive - Green
Left Rear Negative - Green / Black

Right Rear Positive - Purple
Right Rear Negative - Purple / Black

Speaker Negative - Gray / Black

Speaker Positive - Gray
Speaker Negative - Gray / Black

FRONT

L

R

REAR

L

R

INPUT

L

R

GAIN

MIN

MAX

LPF

50Hz 150Hz

SUBSONIC

15Hz 50Hz

SUBSONIC

15Hz 300Hz

FRONT

GAIN

MIN

MAX

REAR

GAIN

MIN

MAX

BOOST

0dB

12dB

X-OVER

LPF

FULL

FRONT

X-OVER

HPF

FULL

REAR

X-OVER

HPF

FULL

TPS-A500.1 / TPS-A600.5

TPS-A500.2

TPS-A350.4 / TPS-A600.5

Отзывы: