Quick Start
Installation Guide
WARRANTY
Maxxsonics USA Inc. warrants this product, to the original consumer purchaser, to be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics USA Inc. will, at it’s discretion, repair or replace defective products during the warranty
period. Components that prove to be defective in materials and workmanship under proper installation
and use must be returned to the original authorized Maxxsonics USA Inc. retailer from where it was
purchased. A photocopy of the original receipt must accompany the product being returned. The
costs associated with removal, re-installation and freight are not the responsibility of Maxxsonics
USA Inc. This warranty is limited to defective parts and specifi cally excludes any incidental or
consequential damages connected therewith. To view the full warranty, please visit the website.
Hifonics products are designed and engineered in the USA by
847-540-7700
www.maxxsonics.com
HF Elite wfr QSG 01 - rev2
A Low pass fi lter will allow only
the bass frequencies to reach the
woofer making for a more natural
transition to the higher frequency
drivers. Check your amplifi er’s
manual for details.
We recommend using an
electronic subsonic fi lter. This will
help to protect the woofer from
extreme low frequency distortion.
Many amplifi ers are equipped
with this type fi lter. Check your
amplifi er’s manual for details.
Depending on the number of woofers you intend to use,
you can confi gure the wiring to provide the best impedance
load for your system. Below are some examples. Consult
your amplifi er’s manual for recommendations.
Low Pass (LPF)
Subsonic
Confi gurations
Connections
Subwoofer specifi cations
Crossovers
Wiring
+]
/3)
+]
68%621,&
10Hz
100Hz
1000Hz
10Hz
100Hz
1000Hz
BZE-10S4S BZE-12S4S
NomZ
4.0
4.0
Ohm
Sd
.034
.052
sqM
Revc
3.550
3.600
Ohm
BL
11.138
11.684
TxM
Vas
37.049
102.600
Liters
Cms
217.485
264.365
uM/N
Mmd
103.058
131.923
Grams
Mms
106.765
138.796
Grams
Fo
33.029
26.274
Hz
Qms
8.698
8.331
Qes
0.634
0.604
Qts
0.591
0.563
no
0.204
0.298
%
SPL@1W
85.106
86.758
dB
Xmax
6.5
6.5
mm
RMS
150
150
Watts
Peak
300
300
Watts
BZE-10S4S
BZE-12S4S
This subwoofer is equipped with
quick disconnect type terminals.
Use crimp type terminals or solder
the wire directly to the terminals.
2
4
4
8
4
4
4
4
4
4
4
