HiFiMAN HE400S, Руководство пользователя, Страница: 7 / 8

www.hifiman.com
HIFIMAN HE400S
09 10
If the ear cups do not comfortably rest on your ears, you can move the
sliding black block on each side of the headband to adjust the length
to suit the shape of your head.
Headband Adjustment
Earpad replacement
① ② ③
To replace the earpads, first carefully remove them by lifting the inner
tabs back. Then you will see there is gap between two screws inside
the driver. Insert the two adjacent plastic clips inside the earpads into
the gap. Use your middle finger to hold the earpads inside while your
thumb holding the outside. Push the earpads slightly with your thumb
until the remaining clips are inserted. Rotate the earpad so that it is
firmly installed.
Set-up and Operation
Owner’s Guide
Please allow for at least 150 hours of consistent playback to properly
break-in your new headphones. This break-in period does not have to
be at high volume.
The connectors utilize 2.5 mm mini plugs on the headphone side.
Push the connector straight onto the socket. Repeat the process with
the other mini plug connector.
The supplied cable adapter with the large ” (6.35mm) jack is
connected with the typical headphone output of an amplifier or even
better with a headphone amplifier. Please be aware that many home
amplifiers may mute the loudspeaker output when a headphone is
connected. For most portable audio devices, the smaller 1/8”
(3.5mm) jack may be used.
To clean your headphone, please use a soft, slightly damp cloth only.
Do not use any detergents and make sure not to let any fluid enter
the open sides of the headphone. The pleather headband can be
maintained using standard leather care products. When your ear
pads become sufficiently worn, you should replace them with a new
pair, available through HIFIMAN or through your local retailer. Note:
The internal drivers do not require maintenance. Any attempt to
remove or modify them will void your warranty.
1.
2.
3.
4.