Easy HD Expressway!
WWW.HIDES.COM.TW
4
Connect RF-output and the video input source
Feed the RF-out to the SMA connector.
Either HDMI or CVBS video input is supported, but only one source can be connected.
Power on
Note: It’s very important, in high gain mode, please attached an antenna before power on the box in
high gain mode. The power amplifier may burn out without any antenna attached.
Apply DC 5V or 12V to the power jack. One and only one DC power source is enough.
1.
HV-320E/EH can support either 5VDC or 6~16 DC input.
2.
For HV-320 with PA900/PA1200/ PA2400, it’s recommended to use 12V DC only.
(DC-in higher than 12.5V will damage the PA!!!)
+
After power on, the default transmission channel is CH 21, 474 MHz / 8MHz BW.
