Diagram 1.
ASSEMBLY INSTRUCTIONS
A.
Mattress Retainer Bar
- Single Bed (1)
- Double &
King
Bed (2)
B.
Head Frame
(1)
C.
Center Rail
(Double &
King
Bed)
D.
Side Rail
(Pair)
E.
Leg Actuator Bars
(2)
F.
End Frame
(1)
G.
Wall Mount Bracket
(2)
H.
Floor Yokes
(Pair)
I.
Yoke Connector Bar
(1)
J.
Bottom Spring Tube
(1)
K.
Springs
(6-Single, 8-Double and 10-Queen)
L.
Spring Cover
(2)
M.
Leg Connector Tube
(1)
N.
Legs
(Pair)
Slat Holder
O.
(3-Single, 6-Double or
King
)
Opened Slat Holder
(3-Single, 6-Double or
King
)
Self Tapping Screw
(6-single, 12-Double or
King
)
P.
Hardware Card NB#1
(1)
Hardware Card NB#2
(1, Double or
King
)
(coordinates with step numbers)
Q.
Slats
(13-Single, 26-Double, 28-
King
)
Section 1: LAY OUT PARTS
Unpack and familiarize yourself with the components.
Single, Double and
King
size Next Beds™ are packed in 3
boxes (Single 2 boxes). Remove the entire contents of
boxes and lay the components out on the floor in the
manner of Diagram 1. Double check the cartons to be sure
you have not missed any parts left in the packing materials.
The Hardware is organized in the card step by step for
convenience.
Do not remove hardware or Slat Holders until directed.
1.
Copyright by Murphy WallBed Systems Inc. No part of this
publication may be reproduced or transmitted without
permission of the Copyright owner.
© 201
7
Murphy WallBed Systems Inc.
Patents Pending.
Slat Holder Bag
Updated
130717
MWBS
PULL TO OPEN
PULL
TO O
PEN
Bed Open Label
Mattress Size
(970x1900mm)
(900x1900mm)
(1370x1900mm)
COMPONENT LIST
SINGLE
-35”x75”
SINGLE - 38”x75”
DOUBLE - 54”x75”
KING
- 60”x80”
(1500x2000mm)
MWBS
MWBS
MWBS
MWBS
MWBS
MWBS
MWBS
MWBS
MWBS
MWBS
