9
|
P a g e
All rights reserved. O&OE. © Hideaway Beds 2019.
Complete Assembly (fig 3)
6.
Place the bolts into the holes at the head end of the bed frame. Lift the bed frame into position,
lining the bolts up with holes of the counterbalanced units. (‘E’&’F’ in Fig 1) and securing by
tightening the nuts.
7.
Join together the two halves of the automatic leg
bar ‘K’& ’L’ then attach the end with the smaller
hole to leg ‘M’ (Fig 3).
8.
Attach the end with the bigger hole to the lug on
frame ‘H’ (Fig 1) using the washer and split pin.
(Fig 3)
9.
Screw pull handle ’N’ to the crossbar of the legs
(Fig 3). Place the assembled bed and sub-frame
in the preferred position in the room and mark
out the holes to be drilled in the wall and floor.
Fix as appropriate. NOTE: IT IS ESSENTIAL THAT
THE BED ASSEMBLY IS SECURELY FIXED TO FLOOR
AND WALL WITH CORRECT FIXINGS (NOT
SUPPLIED).
10.
Fix the sub-frame securely to the wall using the
correct fixings to suit the wall and floor material.
11.
With the bed in the horizontal position, place the
mattress onto the frame and secure with bedding
straps. N.B. without the weight of the mattress
the bed will try to return to its upright position,
so it is suggested to have someone assist you by
holding the bed whilst you put the mattress on.
