Hidden Hilo Скачать руководство пользователя страница 46

Страница: 46 / 62

Box spring Hilo

TECHNICAL MANUAL

page 46 of 62

When you want to put back a removed actuator cable in the actuator or the control box,

you always have to make sure that this happens correctly. Always plug in the cable as

deep as possible and fasten the protective cap again. This is necessary to guarantee a

reliable sealing and functioning. Always make sure that the cables are fastened in such a

way that they cannot be damaged (no loops, kinks or incisions).

Only persons that have been acknowledged by Linak are allowed to open and repair an

actuator. Always replace the entire electric part without opening it. Only a qualified

technician is allowed to replace an actuator.

9.6 Battery BA19 (option)

Technical specifications:

Type:

closed lead-acid battery with a capacity of 1,2 Ah

Average life span at normal use:

minimum 3 years. The way of use can shorten this life span

considerably.

Operating time:

depending on the kind of movement (backrest, high-Low adjustment) and load. A

height variation requires the largest amount of current. 6 to 10 complete high/low cycles can be carried

out when there is a load of 130 kg. Obviously, a lot more manipulations are possible for a backrest

adjustment. An alarm signal warns you during an electric manipulation, in case the capacity of the

battery does not suffice anymore to manipulate the bed. Immediately connect the bed to the net as

soon as this alarm signal is audible.

Charge the battery completely before you start using the bed (at least 12 hours). Multiple high

discharges have a harmful effect on the life span of the battery.

Figure 9.3: Led-indication on a BA19 battery

Description:

Linak uses

closed lead-acid batteries

. Given its long-time experience in using this type of battery,

Linak considers the closed lead-acid battery as the safest battery available at the moment. To prevent

potential problems, we strongly recommend you to follow the maintenance advice as described

hereunder:

▪

The battery sets have an minimal life span of minimum 3 years. Frequent discharges have a

harmful effect on the life span of the battery. It is recommended to connect the control box as

much as possible to the net, so that a long life span of the battery is guaranteed. It is also

necessary to charge a battery that is not built-in, and not used, at least every 6 months. In this

way, you prevent a self-discharge of the battery.

Содержание Hilo































































Результаты поиска

Содержание Hilo

Отзывы:

Бренды по названию

Популярные бренды

Hidden Hilo, Руководство по эксплуатации

Результаты поиска

Содержание Hilo

Отзывы:

Бренды по названию

Популярные бренды