Warranty
(A) Warranty TSL's hardware Products are warranted against defects in
workmanship and materials for a period of twelve (12) months from the date
of shipment, unless otherwise provided by TSL in writing, provided the
Product remains unmodified and is operated under normal and proper
conditions. Warranty provisions and durations on software, integrated
installed systems, Product modified or designed to meet specific customer
specifications (“Custom Products”), remanufactured products, and
reconditioned or upgraded products, shall be as provided in the applicable
Product specification in effect at the time of purchase or in the accompanying
software license.
(B) Spare Parts Spare parts (i.e. parts, components, or subassemblies sold
by TSL for use in the service and maintenance of Products) are warranted
against defects in workmanship and materials for a period of thirty (30) days
from the date of shipment. Spare parts may be new or originate from returned
units under the conditions set forth in subsection D below.
(C) Repair of TSL branded hardware For repairs on TSL branded hardware
Products under this Agreement, including repairs covered by warranty, the
repair services provided are warranted against defects in workmanship and
materials on the repaired component of the Product for a period of thirty (30)
days from the shipment date of the repaired Product, or until the end of the
original warranty period, whichever is longer. Any such defects shall be
notified to TSL in writing within 7 days of the same becoming apparent.
(D) Product Service Products may be serviced or manufactured with parts,
components, or subassemblies that originate from returned products and
that have been tested as meeting applicable specifications for equivalent
new material and Products. The sole obligation of TSL for defective hardware
Products is limited to repair or replacement (at TSL's option) on a “return to
base (RTB)” basis with prior TSL authorisation.
Customer is responsible for prompt shipment to TSL and assumes all costs
and risks associated with this transportation; return shipment to the
Customer will be at TSL's expense. Customer shall be responsible for return
shipment charges for product returned where TSL determines there is no
defect (“No Defect Found”), or for product returned that TSL determines is not
eligible for warranty repair. No charge will be made to Buyer for replacement
parts for warranty repairs. TSL is not responsible for any damage to or loss of
any software programs, data or removable data storage media, or the
restoration or reinstallation of any software programs or data other than the
software, if any, installed by TSL during manufacture of the Product.
(E) Original Warranty Period Except for the warranty applying
solely to the
repaired component arising from a repair service as provided in Section C
above, the aforementioned provisions do not extend the original warranty
period of any Product that had either been repaired or replaced by TSL.
(F) Warranty Provisions The above warranty provisions shall not apply to any
Product
Support Information
(i) which has been repaired, tampered with, altered or modified, except by
TSL's authorized service personnel; (ii) in which the defects or damage to the
Product result from normal wear and tear, misuse, negligence, improper
storage, water or other liquids, battery leakage, use of parts or accessories
not approved or supplied by TSL, or failure to perform operator handling and
scheduled maintenance instructions supplied by TSL;
(iii) which has been subjected to unusual physical or electrical stress, abuse,
or accident, or forces or exposure beyond normal use within the specified
operational and environmental parameters set forth in the applicable Product
specification; nor shall the above warranty provisions apply to any
expendable or consumable items, such as batteries, supplied with the
Product.
EXCEPT FOR THE WARRANTY OF TITLE AND THE EXPRESS
WARRANTIES STATED ABOVE, TSL DISCLAIMS ALL WARRANTIES ON
PRODUCTS FURNISHED HEREUNDER INCLUDING ALL IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR USE. ANY IMPLIED WARRANTIES THAT MAY BE
IMPOSED BY LAW ARE LIMITED IN DURATION TO THE LIMITED
WARRANTY PERIOD. SOME STATES OR COUNTRIES DO NOT ALLOW A
LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES OR CONSUMER PRODUCTS. IN SUCH STATES OR
COUNTRIES, FOR SUCH PRODUCTS, SOME EXCLUSIONS OR
LIMITATIONS OF THIS LIMITED WARRANTY MAY NOTAPPLY.
The stated express warranties are in lieu of all obligations or liabilities on the
part of TSL for damages, including but not limited to, special, indirect or
consequential damages arising out of or in connection with the use or
performance of the Product or service. TSL's liability for damages to Buyer or
others resulting from the use of any Product or service furnished hereunder
shall in no way exceed the purchase price of said Product or the fair market
value of said service, except in instances of injury to persons or property.
TSL is not responsible for any damages incurred during shipment if the
approved shipping container is not used. Shipping the units improperly can
possibly void the warranty. If the original shipping container was not kept,
contact your local distributor or TSL to have another sent to you.
TSL shall not be responsible for any injury, damage or loss of whatever kind
caused directly or indirectly by the goods whether as a result of their
manufacture, operation, use or otherwise and the customer shall indemnify
TSL from any claim arising from any loss suffered by any third party.
© 2006 TSL. All rights reserved.
No part of this publication may be reproduced or used in any form, or by any
electrical or mechanical means, without permission in writing from
Technology Solutions (UK) Ltd. This includes electronic or mechanical
means, such as photocopying, recording, or information storage and
retrieval systems. The material in this manual is subject to change without
notice.
Technology Solutions (UK) Ltd (TSL) reserves the right to make changes to
any product to improve reliability, function, or design. TSL does not assume
any product liability arising out of, or in connection with, the application or use
of any product, circuit, or application described herein. No license is granted,
either expressly or by implication, estoppel, or otherwise under any patent
right or patent, covering or relating to any combination, system, apparatus,
machine, material, method, or process in which TSL products might be used.
An implied license exists only for equipment, circuits, and subsystems
contained in TSL products. TSL and the TSL logo are registered trademarks
of TSL. Other product names mentioned in this manual may be trademarks or
registered trademarks of their respective companies and are hereby
acknowledged.
All software is provided strictly on an “as is” basis. All software, including
firmware, furnished to the user is on a licensed basis. TSL grants to the user a
non-transferable and non-exclusive license to use each software or firmware
program delivered hereunder (licensed program). Except as noted below,
such license may not be assigned, sublicensed, or otherwise transferred by
the user without prior written consent of TSL. No right to copy a licensed
program in whole or in part is granted, except as permitted under copyright
law. The user shall not modify, merge, or incorporate any form or portion of a
licensed program with other program material, create a derivative work from
a licensed program, or use a licensed program in a network without written
permission from TSL. The user agrees to maintain TSL's copyright notice on
the licensed programs delivered hereunder, and to include the same on any
authorized copies it makes, in whole or in part. The user agrees not to
decompile, disassemble, decode, or reverse engineer any licensed program
delivered to the user or any portion thereof.
TSL reserves the right to make changes to any software or product to
improve reliability, function, or design.
TSL does not assume any product liability arising out of, or in connection with,
the application or use of any product, circuit, or application described herein.
Further information is available from the Technology Solutions website at
http://www.tsl.uk.com/downloads.htm
The 1062 Handscanner is intended for use with your company's barcode or
RFID based applications. If you have a problem using this equipment
contact your company's Technical or Systems Support.
Statement of Compliance
Technology Solutions hereby declares that this device is in compliance with
the essential requirements and other relevant provisions of Directives
1999/5/EC, 89/336/EEC and 73/23/EEC. Declaration of Conformities may
be obtained from Technology Solutions on request.
The 1062 Handscanner has been tested to and found to comply with the
following standards for use within the Economic Union:
EMC Directive 89/336/EEC:
EN 61000-6-4:2001
EN 61000-6-2:2001
R&TTE Directive 99/5/EC
:
EN 301 489-3 V1.4.1 (2002-08)
EN 300 330-2 V1.1.1 (2001-06)
Low Voltage Directive 73/23/EEC:
EN 60950-1 2001
The 1062 Handscanner complies with:
RoHS Directive 2002/95/EC
Laser safety:
EN 60825-1:1994 +A1:2002 +A2:2001
IEC 60825-1:1993 +A1:1997 + A2:2001
Regulatory Information
All TSL devices are designed to be compliant with rules and regulations in
locations they are sold and will be labeled as required. Any changes or
modifications to TSL equipment, not expressly approved by TSL, could void
the user's authority to operate the equipment.
Patent information
This product uses devices subject to Symbol Technologies patents. For
further information see http://www.symbol.com/patents
Health and Safety Recommendations
Ergonomic Recommendations
Caution:
In order to avoid or minimize the potential risk of ergonomic injury,
follow the recommendations below. Consult with your local Health & Safety
Manager to ensure that you are adhering to your company's safety programs
to prevent employee injury.
• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
Power Supply
Use only with Technology Solutions charge cradle (1068-01-CC-HSCAN)
and battery (1062-00--BA-HSCAN). Use of other power supplies will
invalidate any approval given to this device, void the warranty for the product
and may be dangerous.
Waste Electrical and Electronic Equipment (WEEE)
For EU Customers: All products at the end of their life must be returned to
TSL for recycling. For information on how to return product please contact
TSL.
The 1062 Handscanner complies with the RoHS Directive 2002/95/EC
Laser safety:
Caution: Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous laser light exposure.
Class 2 laser scanners use a low power, visible light diode. As with any very
bright light source, such as the sun, the user should avoid staring directly into
the light beam. Momentary exposure to a Class 2 laser is not known to be
harmful.
