HID EdgePlus, Быстрое руководство по установке

Страница: 3 / 14

EdgeReader and EdgePlus Installation Part No. 82000-901
Introduction
®
The HID EdgeReader™ and EdgePlus™ are a unique IP-enabled intelligent access control processor
and host interface solution in a single unit. They are designed to provide a complete and full-featured
access control hardware/software infrastructure at “the edge” of the network for OEM software host
systems.
Today, as more IT departments become involved in the security system implementation decision-
making process, they prefer that access control be managed over the network. The EdgeReader and
EdgePlus address this by offering an IP-based solution incorporating PoE capability that takes
advantage of existing LAN and CAT-5 cable infrastructure. In addition, they can be fully integrated into
any host system utilizing an IP network software interface.
Parts List
Description Quantity
EdgeReader or EdgePlus 1
- Mounting screws 4
- 2.2K EOL resistors 8
- Quick Installation Guide 1
- Quick Reference Card 1
Product Specifications
Description Specification
Power Supply 12-16VDC or Power over Ethernet (PoE)
Maximum current at 12VDC per EdgeReader 1 Amp
Average operating current at 12VDC 300 mA – ERW400 EdgeReader and no accessories
Maximum Supplied Power
- ERW400 EdgeReader 600 mA – Split between one or two relays
- E400 EdgePlus 700 mA – Split between a reader and one or two relays
Relay Contact Rating 2 Amps @ 30VDC
Operating temperature range 32°-122°F (0°-50°C)
Humidity 5% to 95% non-condensing
Cable Specifications
Cable Type Length Specification
2-conductor, shielded, using ALPHA 1292C (22AWG) or Alpha 2421C
(18AWG), or equivalent.
Input Circuits * 500 feet (150 m)
2-conductor, using ALPHA 1172C (22AWG) or Alpha 1897C (18AWG), or
equivalent.
Output Circuits * 500 feet (150 m)
500 feet (150 m) to reader Wiegand
(Remote
mounted reader
only)
ALPHA 1299C, 22AWG, 9-conductor, stranded, overall shield.
Fewer conductors needed if all control lines are not used.
Ethernet 328 feet (100 m) Cat5, Cat5E, and Cat6
Power Supply
---- Refer to your Power Supply Installation Guide.
+12 VDC IN
* Minimum wire gauge depends on cable length and current requirements.
April 2007 Page 3 of 14
© 2007 HID Global Corporation. All rights reserved.