13
10. Pre-Ride Checklist
Brake
Check the brake for proper function. When you squeeze the brake lever, the brake should provide positive braking
action. Make sure brake is not rubbing when the lever is released. When you apply the brake with the throttle on/engaged,
the brake cut-off switch should cut power to the motor.
Wheels
Periodically inspect the wheels for excessive wear.
Tires
Periodically inspect the tires for excess wear and replace as needed. Regularly check the tire pressure and inflate as needed.
Frame, Fork and Handlebars
Check for cracks or broken connections. Although broken frames are rare, it is possible for
an aggressive rider to run into a curb or object and wreck, bend or break a frame. Get in the habit of inspecting your scooter
on a regular basis.
Hardware/Loose Parts
Before every ride, check all parts, such as nuts, bolts, fasteners, etc., to ensure they are secure and
assembled correctly. There should not be any unusual rattles or sounds from loose parts or broken components. If you cannot
solve the abnormal sound problem, please contact Hiboy after-sales team immediately. Our email is [email protected].
Safety Gear
Always wear proper protective equipment, such as an approved safety helmet (with chin strap securely buckled), elbow
pads, and kneepads. A helmet may be legally required by local law or regulation in your area. A long-sleeved shirt and long pants are
recommended. Always wear shoes and keep shoelaces tied and out of the way of the wheels and motor and drive system. NEVER
RIDE BAREFOOTED OR IN SANDALS.
Laws and Regulations
Always check and obey any local laws or regulations.
Do not assume that your existing insurance policies necessarily provide coverage for product use.
Check with your insurance company for information regarding insurance.
Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials, store indoors when not in use.
Wall outlet - Green (stand by)
Wall outlet and unit - Red (charging)
Wall outlet and unit - Green (charged)
Note:
If the charger gets warm during regular use, this is a normal response and is no cause for concern. If your charger does
not get warm during use, it does not mean that it is not working properly.
WARNING:
2.The charger supplied with the electric scooter should be regularly examined for damage to the cord, plug, enclosure and other parts.
In the event of such damage, the electric scooter must not be charged until it has been repaired or replaced.Chargers have built-in
overcharge protection to prevent battery from being overcharged.
1.Battery charge can deplete over time. Periodically recharge battery when not in use.
9.Charging
12