HiBoost F20-5S, Руководство пользователя

Страница: 17 / 24

17
More about LCD indication:
LCD Status Meaning Solution Methods
When you don't feel comfortable about LCD indication, you also check ISO and
Alarm LED colors.
Remark: This improvement won't increase the coverage, but is mandatory to avoid
interference with mobile networks according to Telecom regulations.
ISO LED flashing means that ISO function is working great and the self-oscillation
has been eliminated. ISO LED shall remain "Green" or "Slow Flashing Green".
"OFF"
Status
Flashing
LCD
screen
Actual gain is
more than 51dB
less than rated
gain
Not working properly, below
mentioned actions are
recommended:
1. Adjust the antenna direction or
location to decrease receiving signal
level or increase the distance.
2. Add the vertical or horizontal
distance between outdoor and
indoor antennas.
3. Use barriers like walls to increase
the isolation.
4. Reduce booster's gain by external
attenuator or replace with lower
gain antenna if the above methods
don't work.
"---" Status
Output power
is lower than
-10dBm
Severe loop
back or
self-oscillation
or output power
is heavily over
rated which
leads to booster
shut off
Check coverage, leave it as it is if it
is good; take the actions mentioned
below to increase receiving signal
level if coverage is not good.
1. Adjust antenna direction
or location to get stronger
receiving signal.
2. Replace current antenna with
higher gain to get stronger receiving
signal.
https://www.signalbooster.com/ | 1-855-846-2654 | order@signalbooster.com