
Hi-Z CTRL421Remote switch
©2015 Hi-Z Antennas™
www.hizantennas.com
Rear panel connections are pretty straight forward with input 1 being the front panel
switches most counter clock wise position and the left most LED is on. Input number 4 is for
the most clockwise position and last LED is on. The others follow suit in order. Customer
supplies the cable to the remote switch.
The power supplied is through the standard 2.1mm power jack which is protected with an
18 Volt DC MOV device. Do not apply more than 15 Volts DC to this connector. All coax and
power grounds are connected.
Hi-Z Antennas™
8125 SW Larch Drive
Culver, OR 97734
USA