Hi-Tech Diamond All-U-Need, Инструкция по эксплуатации

Страница: 10 / 16

10
We are always trying to make our products better for our customers. A new, helpful addition to the
All-U-Need is the All-U-Need Cup Holder. Instead of a loose, tilted cup that isn’t held up by anything but
the drain tube, we have added a cup holder to your All-U-Need to secure the cup. For a visual, the
pictures below are the before and after images:
Since this is an optional addition, you will have to install it yourself. Follow these three simple
instructions to install your new cup holder:
1)
You will find the black cup holder in your water kit bag, take it out.
2)
Take a screwdriver and unscrew the screw that comes in your All-U-Need base. You will find the
screw in your All-U-Need base in the front right corner.
3)
Center the hole in the black cup holder with the hole in the base and screw the black cup holder into
the All-U-Need base.
IMPORTANT NOTE:
Do not over-tighten the screw or the screw may strip the hole. If this happens,
the screw will not be able to tighten. Only tighten the screw so there is a snug fit.
Without Cup Holder
With Cup Holder
Optional Cup Holder Instructions