53
If the instrument has be set „edit first‟, after pressing soft key
F4 „EDM‟, you may enter the „Information‟ page firstly, then
measurement. The operations are similar.
Press the soft key F2 „Offset‟ to enter the offset menu. Select
one mode and start offset measurement.
Press the soft key F3 „Save‟ to start distance measurement.
After a successful measurement, the coordinate will be saved
automatically.
9.1.6 Config of Surveying
Use „
◀▶
‟ to select
Sequence
You can choose the „survey first‟ or the „edit first‟ under
surveying mode.
Check the same name of point
you may choose to check or not to check if there is a
duplicate of name in the list.
If choose to check, the instrument will first search for the
duplicated name in the file when save the point. If a duplicated
name is found, a box of „duplicated name found!‟ will appear on
the screen. Press „ENT‟ to overlay or „ESC‟ to quit and go back to
the previous page.
If choose not to check, the instrument will directly save the
coordinate of the point.
Edit point
You may choose it if need to edit the information of points
when auto saving after measurement. If choose to edit „manually‟,
then the system will enter the page of „Information‟ when
pressing the soft key „Save‟. If choose to edit „Auto‟, then the
system will save the measurement automatically with point name
added by one.
Record
It indicates whether to display the coordinate by sequence
„NEZ‟ or „ENZ‟ when surveying.
9.2 Staking out
Staking out is to find the earth point for the designing point.
The required process of staking out is as followed:
1.You may select files for staking out .The files can call the
coordinates of station(STA),backsight(BBS) and the stakeout
point etc.
2. Setup station(STA).
3. Setup backsight(BBS) to determine azimuth.
4.Input the coordinates of stakeout point ,then start to stake
out
