HD-MAX Echo Sounder User Guide
114
system will capture the planned route automatically. Click [Record] to record
the
data
to
the
corresponding
survey
line
document
LnA_0_YYYYMMDD_hhmmss of planned route A. After completion of the
measurement, if any problems detected on the survey data, re-measuring is
required. If the planned route A is still under capturing status, click [Switch]
and then the system will create a new record file of the survey line LnA_1_
YYYYMMDD_hhmmss to record the re-measuring data. Perform multiple
repeated measurements for survey line A following the same method as
mentioned above.
2. How to start a new survey line measurement?
When the ship gets close to the planned route A which is to be measured, the
system will capture the planned route automatically. And then the ship will
travel according to planned route A. Click [Record] to record the data to the
corresponding survey line document A_0_YYYYMMDD_hhmmss of
planned route A. After completion of the measurement, when the ship gets
close to the planned route B, the system will capture the planned route B
automatically. Click [Switch] and then the system will create a new record
file of the survey line LnB_0_ YYYYMMDD_hhmmss to record the
re-measuring data. Perform multiple repeated measurements for new survey
lines following the same method as mentioned above.
Data Playback
Click [Playback]
and then a file selection box will pop up. After
select a file according to the correct file format, the software will enter data
playback mode. If the playback data is correct, the depth sounding data and
measuring data will be in synchronization.
Attention: In case of performing data playback at data recording, the data
recording will be suspended.
