- -
6
Overview
1. Set-up
Inserting T card and SIM card
Ensure to turn off the equipment and disconnect with the charger before taking out the battery.
Ask your SIM card dealer whether he has provided SIM card service and the method of usage
who may be service provider or other dealers.
SIM card and its contacts are vulnerable to scratch or bending. Attention shall be attached when
use, insert or take out the card.
Inserting/taking out T-FLASH CARD
Only use approved and compatible T-FLASH card applicable to the mobile phone. Approved
memory card trade standard is applied; however, certain bands may not be completely
compatible with the mobile phone. Using incompatible memory card may damage not only
the card and the mobile, but also the data stored in the card.
1. Insert SD flash card to card slot
：
Push the SD card in the card slot with the label side facing
up until it clicks
2. Take out SD flash card: open the back cover, remove battery can pull out the SD flash card
Charging the battery
Check the model number of the charger before using it to charge the mobile.
Only use approved battery, charger and accessories applicable to the specific mobile model.
Using other types of battery, charger and accessories may violate the certification or warranty
terms of the equipment and may result in danger.
Refer to the dealer for supply of relative approved accessories. Hold the plug to plug out and
cut off the power supply of accessories instead of pulling the power cord.
1. Plug the charger in an AC power socket.
2. The charger connector plug plug at the bottom of the jack of the mobile phone
