background image

1

2

3

DLP-Link 3D Active Glasses
User’s Guide 

Model

C+D3PG

3D Active Glasses For DLP 3D Projectors and TVS

Product Overview

 

Package Contents

1. DLP-Link 3D Active 
2. Cleaning Cloth x1
3. User’s Guide x1
4. USB charging cable x1
5. Interchangeable Nosepiece x3

Glass x1

 

 

This DLP-Link  3D active glasses are designed to be used with all 3D DLP projectors 
3D TVs . The DLP-Link 3D glasses ,equiped with high transmittance and high contrast ratio 
liquid crystal lenses,  offer the brightest 3D visual experience.

and

* Important  Notice:

For a better performance of the battery, please follow the guide below when using:
1)  continuously using the glasses until the LED give low battery warning blinking for the first 
     time using, and then full charge the 3D glasses for at lest 12 hours; 
2)  If the glasses not being used,  please fully charged the glasses at least one time within 
     each 3 months.

Shutters

LCD

Weight

39g

Refreshing

 

rate

96/100/120/144HZ

Transmittance

38

+/-

2

%

Working

 

current

2.8mA

Contrast

 

riato

1200

:

1

Power

 

supply

Rechargeable battery

Sync

 

operation

DLP-Link

Battery

 

life

24 hours continuously
 working

Working

 

Condition

Working

  

temperature

0-40

Storage

 

temperature

Specification

-5

-50

Using range

approximately

8m

Earpieces

Power Button

LCD Lenses

DLP-Link Window

LED Indicator

Charge the 3D glasses:

 Please charge your 3D glasses 

the USB port of your computer or the 3D glasses charger ( sold separately) with supplied
USB charging cable when they give low battery warning . Red LED indicator will keep 
lighting on until the charging is finished. A full charge may take 4 hours.

by connecting the 3D glasses to 

 

Operation Guide

 

Viewing 3D Contents with the DLP-Link 3D Active Glasses:

1. Turn on both your DLP 3D Ready  projector and your 3D content source (such as a 3D 
    Blu-ray player).

2. Set your DLP 3D Ready projector  in “DLP 3D” BEFORE you turn on your content 
   source like a 3D Blu-ray player. The Blu-ray player communicates with the projectors 
   to determine whether or not  the projector is capable of playing 3D content. If this 
   communication occurs before you set the  projector to 3D mode, the player will think 
   that the projector  is not capable of displaying a 3D  image and will only play the video 
   in 2D format. If this happens, turn the 3D Blu-ray player off, set  the projector to 3D mode, 
   and then turn the 3D Blu-ray player back on so the communication between the two can 
   connect correctly.

3. Turn on your 3D content source. You can now press and release the Power ON/OFF  
    button to turnon your DLP-Link 3D Glasses and start watching 3D content.

 * The LED indicator will light on for 1.5s to indicate the glasses are turned on, If the 
   battery is low , the LED idicator will blink once per second , please charge your 3D 
   glasses if this happened.

Product Features

Q1: What can I do if there is no 3D effect after I have put on and turned on the glasses

Try this:
1. Please check if the projector/TV setup is in DLP 3D mode or not.
2. Check the battery volume of your glasses, please change it if low in power
3. Make sure you are watching in 3D sync signal covered area .

Q2: Why do the lenses blink when watching 3D films

Try this:
1. Please change the battery immediately if the battery is seriously low.
2. Interference such as magnetic fluorescent lamps 50 or 60Hz may cause flickers,
    please turn off interference source if this occurs.

Troubleshooting

The 3D glasses will activate their Auto OFF and Auto run intelligently in the following conditions.
1. The 3D glasses are standby (for a period of 5 minutes) when powered on, and they will 
turn into working mode once received the 3D sync signal during standby mode, otherwise, 
the glasses will automatically turn off with the green LED indicator blinking three times.

2. If the 3D glasses become disconnected with the SYNC signal because of 

1> 

incorrectdistance and or angle, 2> input source changed, 3> switched to 2D mode, they 
will automatically work for a period of 5 seconds. The glasses will resume working once a 
3D sync signal is received, otherwise, the glasses will enter into standby mode(for 5 minutes).

Use Tips

4. Turn off your 3D glasses by pressing and holding the power button for about 1.5s after 
     finish your  3D viewing.

* The LED indicator  will blink 3 times to indicate the glasses are turned off.  when the
sycn signal is  blocked or the projector is exited  “DLP 3D” mode, the glasses will turn off 
after 5min standby  and will “wake up” if the signal is the sync signal is received within  
this period.

Maintain the 3D Active Glasses:

Clean the 3D active glasses with a clean and lint-free cotton cloth or with specified 
disposable lenses cleaning tissue. 

REV 0.1

Отзывы: