42
Software:
1. After install the Hard Disk, the Hard Disk can't read, why?
The Hard Disk JUMPER setting error, please check the Hard Disk JUMPER, it should be setup
with MASTER.
2. The CCD display with Black/White mode, why?
The root cause is system auto switch error, please check the channel 1, it should be connected
with CCD. Then system will auto switch to NTSC or PAL system.
3. The Hard Disk format, what is the system password?
The system default password is 111111
4. Run playback function; can not display any video image, why?
Please check the channel 1; it should be connected with CCD.
5. The system time stop, can not counting, why?
The root cause is user enables the DDNS and the RJ45 cable was disconnected. Please
check the network connects status.
6. Sometimes the system will be interfered with other remote controller, why?
Please turn on the LOCK function.
