深圳市海凌科电子有限公司
Shenzhen Hi-Link Electronic Co.,Ltd
Http://www.hlktech.com
Tel:0755-83575155 Fax:
0755-83575189
Shenzhen Hi-Link Electronic Co.,Ltd
2.12.1
System principle.
The whole system consists of server, terminal program and client components, as shown in
fig:
1) server
Receiving device and client registration, to assist the client to find equipment and establish the connection
2) device
Automatically connect to the server after the device is started
3) the client
Run the client will automatically connect to the server, to establish a connection to terminal equipment with the
aid of a server.
2.2
Look over t
he module P2P account and password
1.
To ensure that the RM04 module is in the factory default settings.Method for Restore factory settings: to
power on the module , wait for about 35 seconds. Then press the
Exit/Default
button on the based board
more than 6 seconds,then the module will restart automatically.
2.
Power on the module again, waiting for 35S, the LEDs on the module flashing .
3.
Computer connected the WIFI on the module,SSID:Hi‐Link_XXXX,password:12345678.
