Hi-Force JCS Series, Руководство по эксплуатации, Страница: 6 / 12

Operating Instruction Manual:
OM-JCS-01
Serial Number:
ALL
6
5.0 Installation/Setup
5.1 Before Each Use

Check the selected jacks load rating before use.

Ensure the jack is in good condition.

Check the external surfaces for signs of mechanical damage and/or oil leaks. If either is present,
DO NOT use the equipment until it has been serviced and returned to its proper operating condition.

Ensure the external surfaces are dirt free.
5.2 Filling with Oil
Hi-Force JCS Jacks are despatched from the factory pre-filled with oil, and ready for use. If at some stage
the jack requires to be topped up with oil, proceed as follows;

Place the jack on its back edge with the oil filler port facing upwards.

Remove the oil filler port plug (5)

Top up with high grade ISO15 hydraulic oil.

Replace the oil filler plug (5)

Wipe away any excess oil that may have spilt on the jack exterior.
6. Base plug