BPP107 BATTERY POWERED HYDRAULIC PUMP
OPERATING INSTRUCTIONS
TDS:-
1409
Prepared by:-
Patrick Wright
Approved by:-
Martin Davies
Date:08/10/14
REV NO:-
001
ECO:-
4294
Page
6
of
12
MAINTENANCE & ELIMINATE BREAKDOWN
:
MAINTENANCE
：
1.
Q
：
Change oil or refuel oil:
A
：
Usually change fresh oil to keep its quality for lengthen its life and operate well. Always use Hi-
Force recommended hydraulic oil. Do not mix other brand oils together in case any damage to affect
its function.
2.
Q: Prolonged storage without use:
A: 1. Take out the battery and charge if it will not be used for a long time. Discharge and charge battery
every two months to prolong its life.
2. Clean the tool and smear the anti-rust oil on crimping head and die before storage. Store the
battery and pump in a clean and dry environment.
ELIMINATE BREAKDOWN
：
1.
Q: How to add oil in the pump body?
A: Turn the screw out by a “slotted screwdriver” and add oil in the pump body.
After filling it to full, turn the screw in it. <image 7&8>
Image 7: turn the screw out Image 8: add oil in it
2.
Q: Operating the pump, but it cannot release and return to the origin position.
A: Check the pump according to four steps.
<1>
check the oil if it is not enough, (If no, choosing the suitable oil to fill.)
<2>
check if there is any air in the oil reservoir, (add the suitable oil to full).
<3>
check if there is impurities inside the reservoir, (renew the oil).
<4>
check if there are impurities inside the body, (take apart the inner parts clean them then
reassemble).
