HHP Adaptus Image Kiosk TT8870 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 149

HHP Adaptus Image Kiosk TT8870 Скачать руководство пользователя страница 4

The CE mark on the product indicates that the system has been
tested to and conforms with the provisions noted within the 89/336/
EEC Electromagnetic Compatibility Directive and the 73/23/EEC
Low Voltage Directive.

Complies with:

EN55022:1998 (for ITE emissions)
EN55024:1998 (for ITE immunity), including CISPR 22B:1997
EN61000-4-2:1995
EN61000-4-3:1995

For further information please contact:

Hand Held Products, Inc.
Nijverheidsweg 9
5627 BT Eindhoven
The Netherlands

HHP shall not be liable for use of our product with equipment (i.e., power
supplies, personal computers, etc.) that is not CE marked and does not comply
with the Low Voltage Directive.

UL and cUL Statement

UL listed UL1950 and CSA 22.2 No.950. cUL listed UL1950 and CSA 22.2 No
950.

LED Safety Statement

This device has been tested in accordance with EN60825-1 LED safety, and has
been certified to be under the limits of a Class 1 LED device.

TÜV Statement

TÜV or GS marked to EN60950 and EN60825-1.

C-Tick Statement

Conforms to AS/NZS 3548. C-Tick number: N10410.

Mexico

Certified

Patents

Please refer to the TT8870 packaging for a list of patents.

«
...
2
3
4
5
6
...
»

Содержание Adaptus Image Kiosk TT8870






















































































































































Отзывы:

Нет отзывов