3
6.Select port tab
1.Set “Peripherals” menu for the corresponding port as shown below
.
7.OSD interface description
Страница 1: ...hannels Size 37mm x 36 5mm x 6mm Weight 7g 2 Function button settings CH FR button settings 1 Click the button to switch channels and the channel switches and cycles in the order of CH1 CH2 CH3 CH8 on the basis of the current channel 2 Press and hold the button for over 2 seconds and the band switches and cycles in the order of A B E F R L on the basis of the current band Power 1 Long press 5S to ...
Страница 2: ...5880 R 5658 5695 5732 5769 5806 5843 5880 5917 L 5362 5399 5436 5473 5510 5547 5584 5621 4 Power indicator status 25mW 100mW 200mW 400mW 800mW PIT Fault Power Indicator 1 Flash Stop 3 Seconds 2 Flash Stop 3 Seconds 3 Flash Stop 3 Seconds 4 Flash Stop 3 Seconds 5 Flash Stop 3 Seconds Always Light 5 Remotely adjust VTX transmission frequency and power through OSD interface 1 RX of VTX is connected t...
Страница 3: ...3 6 Select port tab 1 Set Peripherals menu for the corresponding port as shown below 7 OSD interface description ...
Страница 4: ...g up to avoid damaging the internal components 2 Please note that the input voltage is within the specified range and wiring is correct to avoid damaging the internal components 3 Under high power work the temperature of VTX surface is high No touching to avoid burning your fingers ...
