21
4. Driving/feeding
4.1. Start of engine.
Put the throttle hand lever in center position, then turn the ignition key until the lamps light, check that all
lamps light, then turn and keep the ignition lock in next position until the preheating lamp turns off, then
turn the ignition lock entirely to the right and the engine starts.
WARNING
Only continue the preheating for max. 10 seconds, if you exceed this
the preheating and the adjacent components can be ruined.
Do not repeat the preheating if the engine does not start the first
time!
4.2. Driving.
Speed up until the wanted amount of revolutions are found, choose direction and between high and low
gear,(placed in the left side of the steering wheel), put both hands on the steering wheel, place your feet in
a position as wide as possible, then step carefully on the driving pedal (placed outer at right). The gentler
you touch the driving pedal the more pleasant becomes the driving. If you step too hard on the pedal the
machine will rush ahead, likewise if you let the pedal go abruptly the machine will brake abruptly.
WARNING
Watch out that feet and legs do not hang too much out from the
machine, so that it is possible to bump into or be squeezed between
cages, doors etc.
Never activate the pedal standing or with your hands. Only when
you are seated.