HF Elfin-EG10, Руководство пользователя

Страница: 42 / 51

4G_2G DTU Products Function
http://www.iotworkshop.com - 42 -
◼
Format:
◆
Query Operation:
AT+DATA=<id><CR>
+ok=<id,send_num,recv_num><CR><LF><CR><LF>
◼
Parameter:
◆
id: Communication channel number, including the following parameters.
⚫
A: Socket A channel.
⚫
B: Socket B channel.
⚫
C: Socket C channel.
⚫
1: Port 1
⚫
2: Port 2 (G10, G11, G12 support)
◆
send_num: Total number of bytes sent
◆
recv_num: Total number of bytes received
This command is used to query the total number of bytes sent/received after the channel is established.
The value is cleared after the product is restarted.
2.4.2.25. AT+NREGEN
◼
Function: Set/Query Communication Channel Number Registration Package Function
◼
Format:
◆
Query Operation:
AT+NREGEN=<id><CR>
+ok=<id,status><CR><LF><CR><LF>
◆
Set Operation:
AT+NREGEN=<id,status><CR>
+ok<CR><LF><CR><LF>
◼
Parameter:
◆
id: Communication channel number, including the following parameters.
⚫
A: Socket A channel.
⚫
B: Socket B channel.
⚫
C: Socket C channel.
◆
status: Status value, including the following parameter.
⚫
on: Enable.
⚫
off: Close, default
【
off
】
.
2.4.2.26. AT+NREGDT
◼
Function: Set/query communication channel number registration package function
◼
Format:
◆
Query Operation:
AT+NREGDT=<id><CR>
+ok=<id,value><CR><LF><CR><LF>
◆
Set Operation:
AT+NREGDT=<id,value><CR>
+ok<CR><LF><CR><LF>
◼
Parameter :
◆
id: Communication channel number, including the following parameters.
⚫
A: Socket A channel.
⚫
B: Socket B channel.
⚫
C: Socket C channel.
◆
data: Custom data, up to 40bytes, % wildcard has special function, as an escape character,
Use % to send data in HEX format(Ex. %25), it also support special strings as following.

%ICCID: ICCID, AXCII format, Ex
：
89860115831007091458

%IMEI: IMEI, ASCII format, Ex: 862285030465284

%GPS: location information upload, See AT+ LOCATE for detail, ASCII format, Ex:
21.623046,31.221429
。

%IMSI: IMSI, ASCII format, Ex: 460011352509105