•
NEVER OPERATE THE GRINDER IF THE BEAN HOPPER IS NOT FULLY SECURED IN ITS POSITION.
•
Before plugging in the electrical cord, make sure:
o
The grinder’s voltage and frequency rating (according to the bottom information label) is the same
as the supply mains.
o
The wall socket is fitted with an efficient ground contact. DONOT plug the appliance into the supply
mains if the ground system was not positively checked to be in compliance with current safety rules.
IT IS COMPULSORY TO GROUND THE APPLIANCE. The manufacturer can not be held responsible in
the event that this regulation is not complied with.
o
The power consumption of the appliance (according to the bottom information label) is consistent
with the relevant wall socket capacity
o
The wall socket is protected against shortcuts and power surges.
o
Do not use extension cables, plug adapters for multiple sockets. Do not make shift connections.
•
Plug in the grinder
•
Upon first time operation, and before placing beans in to the hopper, VISUALLY check that the blade rotation
direction is clockwise by switching the appliance ON for a second
•
Should rotation direction wrong, don’t use the grinder. Contact your local dealer for further instructions.
5) OPERATION
Grinding coffee with Aroma II grinder:
S Model (manual operation):
•
The appliance is equipped with 3-state On/Off/On switch. (Fig 5.1a)
•
Switch ON the appliance by turning the switch knob clockwise or counterclockwise (according user
convenience).
•
In order to shut off the grinding operation turn main switch knob back into the OFF position.
AD Model (Automatic operation)
•
The appliance is equipped with a 3- state main switch:
OFF, ON, Run
(Fig 5.1b)
•
In order to grind coffee:
o
Turn the main switch to
ON
state. In this position the grinder is in a stand-by mode. As long as the
dispenser is not full of powder, the grinder can grind in two ways:
Manual start, turning the main switch to
RUN
Automatic start, after few turns of the dispenser’s handle (less than one complete circle)
o
When the grinder is running it will stop:
When the dispenser if full of powder
When main switch is turned to
OFF
position.
Fig 5.1a- S model Fig 5.1b- AD model
6
©HeyCafé Co., Ltd.
Version 2.0, August 2016
