HEXFLY PRO-X4, Руководство пользователя

Страница: 12 / 24

9
Now, double check the charge settings. The upper left corner of the screen
should read the specific battery chemistry you are trying to charge. In this
example, LiPo. The value underneath the chemistry type is the charge
current. Check your batteries specifications for proper charge rating, but
with all HEXFLY batteries, we recommend a 1C charge rate. If your battery is
a 5000mAh, your charge current should be 5.0A. If using a 2200mAh pack,
the charge rate would be 2.2A. Simply placing a decimal point after the first
number in your capacity rating will give the correct 1C charge rating. To
further elaborate, a 2C charge rate on a 5000mAh pack would be 10.0A.
Use these programs only when charging a lithium battery (Li-ion/LiPo/LiHV/LiFe) with a nominal voltage of
3.6V, 3.7V, 3.8V or 3.3V per cell, respectively. The charge current going into the battery will vary depending on
the chemistry type so it is VERY IMPORTANT that you select the correct type for your battery. The ending
voltage of the charge is also important as it varies for all four types: 4.1V for Li-ion, 4.2V for LiPo, 4.35V for
LiHV and 3.6V for LiFe. The charge current (how many amps you are putting into the pack) and nominal voltage
(proper voltage for the cell count of the battery you are charging) must be correct for the battery to be charged.
To change these settings, press the START/ENTER key to make the selected value blink. Using the increase
and decrease buttons, set your desired amperage, then press START/ENTER to save the setting. You will then
be asked to select your nominal voltage/cell count. Again, use the increase/decrease buttons to reach your
desired setting and Press the START/ENTER button to confirm and save.