Quick Start /
快速开始
1. Insert battery
into
TLC-BLE
EN
2. Connect TLC-BLE to the instrument
3. Install and launch DATA-VIEWER software (to be downloaded)
4. Enable Bluetooth function or connect the USB Dongle* to your computer
5. Enable communication between the instrument and DATA-VIEWER
1. Insérer la
batterie
dans
TLC-BLE
FR
2. Connecter TLC-BLE sur l’instrument
3. Installer et lancer l’application DATA-VIEWER (à télécharger)
4. Activer la fonction Bluetooth sur l’ordinateur ou connecter la clé dongle*
5. Activer la communication entre l’instrument et l’application DATA-VIEWER
1. Batterie in
TLC-BLE
einsetzen
DE
2. TLC-BLE mit dem Instrument verbinden
3. DATA-VIEWER Software (zum Herunterladen) installieren und starten
4. Bluetooth auf dem Computer aktivieren oder den USB-Dongle* anschließen
5. Kommunikation zwischen dem Instrument und DATA-VIEWER ermöglichen
1.
将电池插入
TLC-BLE
CN
2. 将 TLC-BLE连接到量具
3. 安装并启动 DATA-VIEWER软件 (需要下载)
4. 启用蓝牙功能或将 USB软件狗连接到计算机*
5. 启用量具与DATA-VIEWER间的通信
* use the USB extension cable to maximize transmission range when the USB port on the
computer is not optimally located. The (included) fastening system helps to positioning
the dongle vertically and at the desired height.
* utilisez la rallonge USB pour maximiser la portée quand le port USB de l’ordinateur n’est
pas positionné de manière optimale. Le système de fixation (inclus) aide à accrocher la clé
dongle verticalement et à la hauteur souhaitée.
* verwenden Sie das USB-Verlängerungskabel, um die Reichweite zu maximieren, wenn der
USB-Steckplatz des Computers nicht optimal positioniert ist. Das (mitgelieferte)
Befestigungssystem hilft dabei, den Dongle vertikal und in der gewünschten Höhe zu
positionieren.
* 当连线够不到计算机上的USB口时,请使用USB延长线扩展传输范围。
紧固系统（已包含）有助于将加密狗竖直并固定在所需高度
DATA-VIEWER sends data into Excel, Q-DAS software or .CSV file
Free download of TESA DATA-VIEWER
www.tesatechnology.com/documents/softwares/tesa_data_viewer.zip
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation
Caution: The user is cautioned that changes or modifications not expressly approved by
TESA SA could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for uncontrolled
equipment and meets the FCC RF exposure guidelines. This equipment has very low
levels of RF energy that are deemed to comply without testing of specific absorption
ration.
IC Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
This equipment complies with Canada radiation exposure limits set forth for uncontrolled
environments. This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
Model: 04760184
FCC ID: SKW04760184
IC:
11163A-04760184
Caution / Attention / Warnhinweis /
警告
Risk of explosion if type of battery is replaced by an incorrect type.
Follow local regulations when disposing of used batteries
Risque d’explosion si la batterie est remplacée par une batterie de type incorrect.
Procédez au recyclage ou à la mise au rebut des batteries usagées de façon appropriée.
Es besteht Explosionsgefahr, wenn die Batterie durch einen falschen Typ ersetzt wird.
Recyceln oder entsorgen Sie gebrauchte Batterien vorschriftsgemäß.
如果使用了错误的电池类型，则有爆炸的风险。
处置废旧电池请遵照当地的规定。
