PwrPak7 Family Quick Start Guide Rev 0A
4
Setting Up the PwrPak7
Complete the following steps to connect and power the PwrPak7.
*
2 A Slow Blow Fuse
1. Connect the GNSS antenna to the ANT port and mount the antenna to a secure, stable structure with
an unobstructed view of the sky.
For PwrPak7D, PwrPak7D-E1 and PwrPak7D-E2, connect the primary GNSS antenna to the ANT1
port and the secondary GNSS antenna to the ANT2 port.
2. Connect the USB, Ethernet or a COM port on the receiver to a USB, Ethernet or serial port on a
computer.
If using a USB connection, install the USB drivers (to obtain the drivers, go to the NovAtel website:
A wired connection is not needed if using the Setup & Monitor (Web) interface through a WiFi
connection.
3. Connect the power cable connector to the PWR port. The exposed wires can then be tied to a 9-36
VDC power supply capable of at least 15 W.
4. Install a user supplied 2 A slow blow fuse in the positive line of the connection to the power source to
protect the power supply wiring and your warranty.
