User manual - Machine Automation Solution - V3R003
65 / 102
To learn how to import a
Line map
to the on-board computer, check topic
11.2.3.1 Save guide
Important
This feature will only be available if the selected guide is temporary.
When a new guide is created, if the used had selected guide saving options
Never save
or
Always ask
and denied saving
the guide, it will still be available in the
Wayline management
as a temporary guide and the user will have a chance to
save it again.
Important
While the active guide is not saved, it can be accessed as a temporary guide. However, in case
a new guide of the same type is created, the previous temporary guide will be lost and replaced
by the new one. The system allows one temporary guide of each guide type. To ensure you can
access it again, save your temporary guide.
Warning
When you try to save a guide with the same name as a previously saved one, you will be asked
if you wish to overwrite it.
Important
To configure the way of saving guides, visualize top
.
Icon
Description
Guide
Guide management
Save
To save a temporary guide to the system, proceed as follows:
1.
On the operation screen, select the
Guide
option followed by
Wayline management
;
2.
Select the temporary guide you wish to save from the list of guides;
3.
Select option
Save
;
4.
Edit the temporary guideʼs name;
5.
Press
OK
to confirm.
Figure - Save guide
11.2.3.2 Import guide
In this option it is possible to import guides to display to use them at a later time.
Icon
Description
Guide
