Hexagon AgrOn Ti10, Руководство пользователя

Страница: 46 / 102

User manual - Machine Automation Solution - V3R003 46 / 102
11. Guidance
The navigation aid systems allow input economy and better use of the work area, once they minimize the overpass during
input application and culture treatments.
They have the following work precisions up to 95% of the time:
Use this setting For
GNSS L1 - GPS+Glonass 28 cm (15 min each pass)
GNSS L1/L2 - GPS+Glonass 15 cm (15 min each pass)
GNSS L1/L2 with TerraStar 4 cm (absolute)
RTK 2 cm (absolute)
11.1 Settings
The following settings are available:
·
Width (in meters) ;
·
Sensitivity (in meters) ;
·
Side overlap (in meters) ;
·
Activity overlap: Yes or No ;
·
Overlap rate (%) ;
·
Wayline settings ;
·
Reverse detector ;
·
Odometer: On or Off ;
·
Perimeter ;
·
Erase perimeter ;
·
Coverage info outside map .
Figure - Guidance
11.1.1 Parameters
To alter the light bar parameters, proceed as follows:
1.
Access the Guidance option from the Configuration menu ;
2.
Select the parameter you wish to alter;
3.
Enter the desired values;
4.
Press OK to confirm the operation.
The following parameters are available for setting:
·
Width (in meters)
Indicates the width of the stride according to the selected implement.