20
© Hexagon Mining
3.3.2 GNSS Antenna Installation
CAUTION
Antennas must be mounted more than 20 cm away from any other antenna.
CAUTION
The OAS-LV GNSS Antenna must be mounted with a clear view of the sky and free from any
obstruction from machine components.
Note
Read all instructions prior to assembly and installation.
The OAS-LV GNSS Antenna must be mounted with a clear view of the sky and free from any obstruction from
machine components and must meet the following criteria.
1. The OAS-LV GNSS Antenna must be on the flat level part of the machine or mast.
2.
Route the cables through the existing grommets if possible; if not, modification may be required to route
the cables to the required location. If creating a new entry point, use a grommet to protect the cables.
3.
The cables must not be cut, kinked, or bent tightly, as it degrades performance and a system failure may
result.
4.
Cables must be routed neatly back to the OAS-LV.
3.4
Connection to Additional Sensors or devices
For connection to all additional sensors and interfaces refer to machine specific installation manuals.
3.5
Upgrade Software
New versions of software may be installed on the OAS-LV module from either a USB Flash Drive or by using
Hexagon’s web-based software configuration tool. Please consult the Hexagon Mine Protect OAS-LV
Configuration manual for detailed instructions regarding how to update software on the OAS-LV module.
4
Care and Transport
4.1
Transport
When transporting the product by rail, air, or sea, always use the complete original Hexagon Mining
packaging, cardboard box, or an equivalent, to protect the product against shock and vibration.
4.2
Storage
Ensure the temperature limits are followed when storing the equipment, particularly in summer if the
equipment is inside a vehicle. Please reference the Technical Data section for information about temperature
limits.
4.3
Cleaning and Drying
4.3.1 Product and Accessories
Use only clean, soft, lint-free cloth for cleaning. If necessary, moisten the cloth with water or pure alcohol. Do
not use other liquids; these may attack the polymer components.
4.3.2 Connectors and Plugs
Keep plugs clean and dry. Blow away any dirt lodged in the plugs of the connecting cables.
