Quickstart manual for TESA TWIN-T20
1
1
2
13
6.8 Connectivity
6.9 Folder
Choice of
transferred data
Remarque 2 : protocole sortie RS-232
Features:
Send required information followed by <CR>
Nota 2:
RS-232 output protocol
2 measuring programs can be saved in the TWIN-T20 and can be selected on this page.
Information about
transferred data
format
Choice on measurements to be transferred:
- Transferable measurement (see 6.5.3 chapter) of the sequence
- Measurements of the sequence
- transferable part dimensions (see 6.5.3 chapter)
- Dimensions of the part
- Measurement 1.1
- Measurement 1.2
Nota 1:
you can easily obtain an overview from the measurements definition page
(see 6.5)
Symbol for measurements set as transferable
Transmission speed: 4800 Baud
Parity: even
Start bit: 1
Character output: 7 ASCII databits
Stop bit: 2
