
IMPORTANT: IT IS ADVISABLE THAT THE PRODUCT IS ASSEMBLED AT, OR AS CLOSE AS POSSIBLE TO WHERE IT WILL BE FINALLY LOCATED
The objec�ve of this instruc�on is to illustrate the recommended assembly sequence for this product, any devia�on from this will be the sole
responsibility of whoever carries out the assembly.
We advise appropriate personal protec�ve
equipment is worn during assembly including
eye protec�on and gloves.
Most procedures will not require two people but it may
be easier to have assistance.
x1
Eye Protection
Gloves
SINGLE PERSON ASSEMBLY
CARING FOR YOUR HEX LIVING PRODUCT
PRODUCT REGISTRATION
PERSONAL PROTECTION EQUIPMENT
PLEASE READ THIS DOCUMENT FULLY PRIOR TO STARTING ASSEMBLY PROCEDURE
Your HEX Living product is designed to stand the test of
�
me, which is why we’re happy to o
ff
er a
life�me warranty on our products.
With zero maintenance required, simply assemble your HEX
Living product and enjoy pu�ng it to great use in your garden.
Periodically, you might want to give your product a clean, these simple care
�
ps are not essen
�
al to the performance of your product:
-
Remove surface dirt with plain water using a jet wash or sponge, the coa
�
ng on our products will ensure dirt or mud simply
wipes awa
y.
-
Periodically clear the lid of fallen
leaves.
- If your product has gu
�
ering, remove leaves and garden debris as you would on your hom
e.
IMPORTANT:
Prior to assembly, please ensure you have registered your HEX Living product using the unique serial number found on
the cover of this document, please visit
www.hexliving.co.uk
to register your product and access the HEX Living life
�
me warranty and
video instruc�ons.
Ensure there is adequate clearance where the product is to be located:
1353 x 653 x 635mm
Footprint dimensions (W x D)
1303 x 603mm
Clearance required for Lid to open (W x H)
653 x 1202mm
Exterior dimensions including overhang (W x D x H)
Chartley:
Advisory Data
i