Hewlett Packard Enterprise ProLiant XL190r Gen10, Руководство пользователя

Страница: 149 / 183

Description Chassis Fan configuration Number of drives
supported by the
server Maximum inlet
ambient
temperature
(24 SFF or 16
SFF + 8 NVMe
backplane)
0 to 6 drives
5
Not supported
Apollo r2800
Gen10 Chassis
(24 SFF
backplane with
SAS expander)
Redundant and
nonredundant 0 to 24 drives Not supported
Apollo r2800
Gen10 Chassis
(16 NVMe
backplane)
Redundant and
nonredundant 0 to 8 drives Not supported
0 to 4 drives
6
Not supported
Nonredundant 0 to 2 drives
7
Not supported
Redundant Optical cable: 22°C
(71.6°F)
Copper cable: 22°C
(71.6°F)
1
The drive capacity must be less than 10 TB.
2
The drive capacity must be greater than or equal to 10 TB.
3
If the component is installed in server 1, and the server is installed in the Apollo r2200 Gen10 Chassis, drive blanks
must be installed in drive bays 1-2 and 1-10. Similarly, if the component is installed in server 3, and the server is
installed in the Apollo r2200 Gen10 Chassis, drive blanks must be installed in drive bays 3-2 and 3-10. For more
information, see
Installing drive blanks and thermal bezel blanks for components with thermal limitations on
page 23.
4
If the component is installed in server 1 and the server is installed in the Apollo r2200 Gen10 Chassis, bezel blanks
must be installed in drive bays 1-9, 1-10 and 1-11. If the component is installed in server 3 and the server is installed
in the Apollo r2200 Gen10 Chassis, bezel blanks must be installed in drive bays 3-9, 3-10 and 3-11. For more
information, see
Installing drive blanks and thermal bezel blanks for components with thermal limitations on
page 23.
5
If the component is installed in server 1 and the server is installed in the Apollo r2600 Gen10 Chassis, bezel blanks
must be installed in drive bays 1-9 to 1-14. If the component is installed in server 3 and the server is installed in the
Apollo r2600 Gen10 Chassis, bezel blanks must be installed in drive bays 3-9 to 3-14. For more information, see
Installing drive blanks and thermal bezel blanks for components with thermal limitations on page 23.
6
If the component is installed in server 1 and the server is installed in the Apollo r2800 Gen10 Chassis, the removable
blanks must be installed in drive bays 2-1 to 2-4. If the component is installed in server 3 and the server is installed in
the Apollo r2800 Gen10 Chassis, the removable blanks must be installed in drive bays 4-1 to 4-4. For more
information, see
Installing drive blanks and thermal bezel blanks for components with thermal limitations on
page 23.
7
If the component is installed in server 1 and the server is installed in the Apollo r2800 Gen10 Chassis, bezel blanks
must be installed in drive bays 1-3, 1-4, 2-1, 2-2, 2-3, and 2-4. If the component is installed in server 3 and the server
is installed in the Apollo r2800 Gen10 Chassis, bezel blanks must be installed in drive bays 3-3, 3-4, 4-1, 4-2, 4-3 and
4-4. For more information, see
Installing drive blanks and thermal bezel blanks for components with thermal
limitations on page 23.
Specifications 149