Hewlett Packard Enterprise HPE MSA 1060 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 90

Hewlett Packard Enterprise HPE MSA 1060 Скачать руководство пользователя страница 9

Chapter 1

Overview

9

For the mini-SAS HD host interface, both standard and fanout cables (MSA 1060 SAS only) are supported for host
connection. Always use qualified SAS cable options for supporting the host interface protocol as described in your
product's QuickSpecs (see

"Product QuickSpecs" below

for more information). Host connection for mini-SAS HD controller

modules are described by cabling diagrams in

"Connecting hosts" on page

. Connection information for the SAS

fanout cable option is provided in

"SAS fanout cable option" on page

.

TIP See the topic about configuring host ports within the Storage Management Guide.

MSA SAS controllers provide two (MSA

1060) or four (MSA

2060/2062) high density mini-SAS (mini-SAS HD) ports per

controller module. The mini-SAS HD host interface protocol uses the SFF-8644 external connector interface defined for
SAS 3.0 to support a link rate of 12 Gb/s using the qualified connectors and cable options.

Features and benefits

Product features and supported options are subject to change. Online documentation describes the latest product and
product family characteristics, including currently supported features, options, technical specifications, configuration
data, related optional software, and product warranty information. For more information, see

documentation" below

and

"Support and other resources" on page

Product QuickSpecs

Check the QuickSpecs for a complete list of supported servers, operating systems, and options. See:

l

www.hpe.com/support/MSA1060QuickSpecs

l

www.hpe.com/support/MSA2060QuickSpecs

l

www.hpe.com/support/MSA2062QuickSpecs

Related MSA documentation

Related support information is provided in

"Support and other resources" on page

. Product documentation titles

pertaining to management interfaces are shown in the table below.

For information about

See

Using the Storage Management Utility (SMU) web interface to
configure and manage the product

HPE

MSA 1060/2060/2062 Storage Management Guide

Using the command-line interface (CLI) to configure and manage
the product

HPE

MSA 1060/2060/2062 CLI Reference Guide

Events codes and recommended actions

HPE

MSA Event Descriptions Reference Guide

Table 1 Related MSA documentation

To access the above MSA documentation, see the Hewlett Packard Enterprise Information Library:

www.hpe.com/info/msadocs

.

NOTE The table above provides titles of related MSA documents used with this guide. These documents are
informally referenced within this guide as follows:

l

Storage Management Guide

l

CLI Reference Guide

l

Event Descriptions Reference Guide

«
...
7
8
9
10
11
...
»

Содержание HPE MSA 1060



























































































Отзывы:

Нет отзывов