45
•
Configure queue scheduling for each queue in interface view, as described in "
per-queue congestion management
."
•
Configure a queue scheduling profile, as described in "
Configuring a queue scheduling profile
."
Both Layer 2 and Layer 3 Ethernet interfaces support the congestion management feature. The term
"interface" in this section collectively refers to these two types of interfaces. You can use the
port
link-mode
command to configure an Ethernet port as a Layer 2 or Layer 3 interface (see
Layer
2—LAN Switching Configuration Guide
).
To achieve congestion management, perform the following tasks:
Tasks at a glance
(Required.) Perform one of the following tasks to configure per-queue congestion management:
•
•
•
•
•
(Required.)
Configuring a queue scheduling profile
Configuring per-queue congestion management
In per-queue congestion management, you manage traffic congestion on a per-queue basis on
ports.
To prevent interfaces from forwarding packets incorrectly, do not batch modify the queuing
configuration on these interfaces in interface range view. Modify the queuing configuration for these
interfaces one by one.
Configuring SP queuing
Step Command Remarks
1.
Enter system view.
system-view
N/A
2.
Enter interface view.
interface interface-type
interface-number
N/A
3.
Configure SP queuing.
qos sp
By default, byte-count WRR queuing is
used on an interface.
Configuring WRR queuing
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter interface view.
interface interface-type
interface-number
N/A
3.
Enable WRR queuing.
qos wrr
{
byte-count
|
weight
}
By default, byte-count WRR queuing is used
on an interface.
Содержание FlexFabric 5940 Series
Страница 23: ...17 Figure 3 QoS processing flow ...
Страница 84: ...78 Figure 26 MPLS label structure ...
Страница 91: ...85 Switch burst mode enable ...
