LED name
LED color
Status of hardware
Recommended action
Flashing green (on 1
second, off 1 second)
One or both of the
following are true:
• One or more
environmental ranges
are exceeded.
• Error log contains
one or more port
diagnostic error
messages.
Check environmental
conditions, error log,
Port Status LEDs,
transceivers, cables, and
loopback plugs. Correct
error condition. Clear
error log. Rerun
diagnostics to verify fix.
Amber
Boot-up state; switch is
disabled or offline.
Needs attention.
Port link status LED patterns
Table 7: Port link status LED patterns
on page 26 shows the LED color, meaning, and recommended
action.
Table 7: Port link status LED patterns
LED name
LED color
Status of hardware
Recommended action
Port Status
No light
Port is offline.
No light or signal carrier (transceiver
or cable) detected.
Check transceiver and cable.
Steady green
Port is online (connected to external
device) but has no traffic.
No action required.
Slow-flashing green
(on 1 second, off 1
second)
Port is online but segmented,
indicating a loopback cable or
incompatible switch.
Verify the correct device is
connected to port and the switch
and port settings are correct.
Fast-flashing green
(on 1/2 second, off
1/2 second)
Port is in internal loopback
(diagnostic).
No action required.
Flickering green
Port is online with traffic flowing
through port.
No action required.
Steady amber
Port is receiving light or signal
carrier, but is not yet online.
No action required.
Table Continued
26
Managing the Brocade 32Gb FC Switch Module
Содержание Brocade 32Gb/12 2SFP+
Страница 5: ...Q 44 R 45 S 45 T 46 U 46 W 46 Z 47 5...
