1
2
Figure 4: Installing the Brocade 32Gb FC Switch Module into an interconnect bay
1. Insert the switch module
2. Lock the switch handle
4.
Press the switch handle into the latch to lock the Switch in place.
HPE Synergy Frame Link Module power verification
HPE OneView is the virtual appliance that monitors and manages the devices contained within the frame.
HPE OneView provides a single point from which you can perform basic management tasks on switches
or compute modules installed in the frame and is the interface to the HPE Synergy Frame Link Module.
IMPORTANT:
Hewlett Packard Enterprise recommends reading the appropriate
HPE Synergy
12000 Frame Setup and Installation Guide
and the
HPE OneView User Guide for HPE Synergy
.
Reading these guides in sequence promotes an overall understanding of your Synergy Frame.
Once the switch is installed in the interconnect bay, the HPE Synergy Frame Link Module verifies the
switch type matches the mezzanine cards present on the servers. If there is no mismatch, the HPE
Synergy Frame Link Module powers up the switch.
If the switch does not power up, check the frame and switch status with the HPE OneView web interface.
For more information, see the
HPE OneView User Guide for HPE Synergy
.
Checking LEDs
Locate LEDs. Check the LED indicators in
on page 14.
2
3
1
4
5
6
7
8
9
10
11
12
Figure 5: Identifying LEDs
14
Setup
Содержание Brocade 32Gb/12 2SFP+
Страница 5: ...Q 44 R 45 S 45 T 46 U 46 W 46 Z 47 5...
