Hewlett Packard Enterprise aruba Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 41

Hewlett Packard Enterprise aruba Скачать руководство пользователя страница 40

Chapter 7

Mesh Networks

Mesh Networks

The following are common issues observed in mesh networks:

n

APs are Unable to Establish a Mesh Link

APs are Unable to Establish a Mesh Link

The following procedure describes how to troubleshoot issues, if APs fail to establish a mesh link:

1.

Check Mesh Cluster Name and Mesh Cluster Key of the APs

2.

Check the Extended SSID Settings of the APs

3.

Check if a 5 GHz SSID is Configured on the Network

4.

Check the Uplink Connection of the Mesh Point AP

5.

Check the RF Environment of the Mesh APs

Check Mesh Cluster Name and Mesh Cluster Key of the APs

APs must have the same mesh cluster name and mesh cluster key to form a cluster. The mesh cluster name
and the mesh cluster key is configured using the

mesh-cluster

command.

Run the

show mesh cluster configuration

command in the CLI to view mesh cluster information of the

AP. Check the cluster details on mesh APs to verify if they have the same mesh cluster name and mesh
cluster key.

The sample below displays the mesh cluster details, generated by the

show mesh cluster configuration

command:

(Instant AP)# show mesh cluster configuration
Mesh cluster name :mesh_clusterl
Mesh cluster key :Manual

Check the Extended SSID Settings of the APs

Ensure that

Extended SSID

is disabled in the AP. APs will fail to establish a mesh link, if extended SSID is

enabled. The extended SSID setting is available in

General > Advanced options

in

Configuration >

System

page of the Instant WebUI.

Check if a 5 GHz SSID is Configured on the Network

Th 5 GHz radio of the AP is used to handle the mesh-backhaul traffic. Instant APs automatically disable the 5
GHz radio if there are no active networks in the 5 GHz band. Therefore, it is necessary to have an
SSID operating on the 5GHz band to keep alive the 5 GHz radio of the AP.

Run the

show network

command to view the list of networks enabled on the AP. Check the network list for

5 GHz networks. If there are no 5 GHz networks, configure an SSID to operate in the 5 GHz band.

Check the Uplink Connection of the Mesh Point AP

In mesh networks, the AP with the Ethernet uplink connection will function as the mesh portal AP and there
can be only one mesh portal in a mesh cluster. If two APs in a mesh network have Ethernet uplink, both the

Aruba Instant AP | Troubleshooting Guide

40

«
...
38
39
40
41
»

Содержание aruba










































Отзывы:

Нет отзывов